Walleye Fishing Jig:Casting & Retrieve Amazing Tips And Uses!

Posted in walleye fishing - by Fishing_tips | June 28th, 2009

NEVER BEFORE REVEALED Walleye Fishing Secrets Click Here!

To use walleye fishing jigs you need to fine tune your concentration and develop a sensitive touch. Walleyes are finicky biters and you may feel anything from a sharp tap, or you may just see your line start to go tight slowly. Aggressive walleye often will inhale a walleye jig while sucking water, then push the water back through the gills. When a walleye inhales a jig you should feel a sharp tap,set the hook immediately! Many times when walleyes are not actively feeding they will just put their mouth over the jig. All you will see is your line start to move slightly! set the hook!

New walleye fisherman allot of times get frustrated because they fail to set the hook on many of their strikes. Manny beginners make the mistake of waiting for a sharp tap or strike on their walleye fishing jig like if they were fishing for other game fish with a crankbait.Key Walleye tip: Walleyes will hit your jig when it is sinking not on the upward and forward movement.

I have found when in doubt, or if anything seems different from the normal routine, set the hook! Key point: if the jig seems to sink abnormally after the hop, set the hook! a walleye has probably taken your walleye jig. If you think you have caught a weed on your retrieve and the drag is spilling line, set the hook! this could very well be a walleye. We all get those pesky little pecks on our jigs that we think are just pesky perch, but many times these little pecks are not perch but walleye! Set the hook don’t miss out on a trophy fish because you thought it was a perch.

You need to be a ble to detect anything abnormal when your jig is sinking, remember this is when you will get your strike or hit. If you twitch your rod tip, then drop it back rapidly as the jig sinks, slack will form and you will not feel the strike. Instead , lower the jig with tension on the line, as if you were setting it gently on bottom.

You will detect more strikes if you carefully watch your line and rod tip. Many times, you will see a that you cannot feel. If you see your line twitch were it enters the water, or the line moves slightly to the side, set the hook.

Key Steps: How To Cast and Retrieve A walleye fishing jig

Step#1 LIFT the jig with a slight pop of the rod tip, then let the jig sink all the way to thebottom. How much of a “pop” will depend on how the fish are reacting the day you are fishing. When the fish are not moving much a very slow retrieve is the best method. You will need to almost put the jig right next to their mouth in order to get a bite.

Step#2 Lower the rod tip, key point: this is when you will get your walleye strike or bite. Make sure you keep the line taut at all times when the jig is sinking. Repeat step one and 2 until you get in a rhythm. MAKE SURE you reel up a few inches of line each time you pop the walleye jig.

Step#3 STRIKES Remember a walleye hit will come when the jig is floating back to the bottom, not when the jig is moving upwards or forwards. If you feel a sharp tap that means the wallye has sucked in the jig, set the hook immediately!If the fish aren’t active all you will see is your line tighten slightly, or the jig doesn’t descend to bottom naturally.

Step#4 SET THE HOOK immediately when you feel anything unusual, a walleye spits out a walleye fishing jig quickly. A Flick of the wrists result in a faster hook set then a long sweep of the arms, but you will need a stiff rod to sink the hook.

Mark Fleagle is an Expert Author At Ezinearticles.com. and has over 30 years of fishing experience who has written 100’s of useful fishing articles. Would you like to max out your catch on your next fishing trip? Blow your fishing buddies out of the water and get your bragging rights today! Also don’t forget to get your free copy of “78 Fishing Discoveries Unleashed” http://www.oldfishinghole.com

walleye jig